This kit contains 3 lines.
Replaces OE Numbers
2 x Front. Replaces OE: 46210-0F010, 46210-0X800, 46211-0F010, 46211-0X800, 46211-0F010, 46211-31G11, 46211-EK400, 46211-EK40A, 46210-0F010, 46210-31G11, 46210-EK400, 46210-EK40A
1 x Rear. Replaces OE: 46210-2S500, 46210-2S510, 46210-2S700, 46210-2S710, 46210-2S711, 46210-2S71A, 46210-2S71C
OEM Replacements/Extended Custom Replacements
Like-for-like replacements for the standard flexible brake lines on your vehicle.
All our kits are custom made so if you have any suspension upgrades giving you extra flex, we can make the lines to suit.
Pioneer 4×4 Brake Lines are specifically designed for harsh environments that 4×4 vehicles can endure.
All Pioneer 4×4 brake line kits are handmade to order, this allows us to manufacture the correct length of brake line for any 4×4 vehicle with or without suspension upgrades that give lift between the axles, chassis and vehicle body.
Each Pioneer 4×4 brake line kit is assembled in-house from the finest quality stainless steel fittings swaged directly to hard-drawn tensile stainless steel braided hose.
Pioneer 4×4 brake line kits eliminate that ‘spongy’ feeling often found with rubber hoses under extreme braking conditions – the time when performance is needed the most. By replacing the original rubber hoses with our complete system, you will remove this sponginess and your braking will deliver new levels of precision.
Don’t risk using inferior brake lines when you can trust us to improve braking reliability and performance – We use stainless steel in our lines and our fittings. Other competitors use zinc-plated fittings which are at risk of corrosion.
Choose your colour of hose and coil, don’t forget to leave a description if you require the hoses to be custom made to suit any suspension upgrades.
What Is Included
- Stainless steel braided brake lines
- Plain stainless steel banjo bolts (if the fittings require them)
- Copper crush washers (if the fittings require them)
- Installation leaflet
- We offer a no-quibble Lifetime Warranty Click Here For Info
All our hoses are tested to extremes in the laboratory, and on the racetrack, where they’re proven time and time again. Our hoses meet and exceed regulatory requirements all over the world, making them road legal anywhere.
Please contact us for copies of our certificates.
|Line inner material||PTFE|
|Line outer material||Stainless steel (303/304) and protective PVC cover|
|Fittings material||Stainless steel (303/304)|
|Temperature range||-70°C to 260°C (-94°F to 500°F)|
|Inside diameter||3.5mm (0.138″)|
|Outside diameter||7.5mm (0.295″)|
|Maximum working pressure||290 Bar (4206 PSI)|
|Burst pressure||870 Bar (12618 PSI)|
|Minimum bend radius||38mm (1.496″)|