FBS-058 Fitting Instructions — Discovery 2 V8 1998-2004 LHD
Bag-by-bag fitting instructions for your complete braided brake line kit. Every line is supplied in a numbered bag — work through them in order and check each run before you tighten anything.
| Model | Engine | Years | Drive | Spec | SKU |
|---|---|---|---|---|---|
| Discovery 2 | V8 | 1998-2004 | LHD | Standard | FBS-058 |
Before you start
Brakes are safety critical. Read the brake & clutch line fitting and safety guide in full before fitting — it covers routing and slack, tightening sequence, torque figures and bleeding. If you are not confident, have the kit fitted by a competent garage.
Download these instructions
A print-ready A4 PDF of this page — fitment details, the kit layout diagram and the full bag schedule — to take out to the vehicle.
9 numbered bags
6 Line Flexi kit
Covers 2 x Front chassis bracket to caliper, 2 x Body to chassis, 2 x rear chassis bracket to caliper
1 line
From Front master cylinder port → To front port on abs module
1 line
From Back master cylinder port → To Back port on abs module
1 line
From FL Modulator → To O/S Front chassis bracket
1 line
From FR Modulator → To N/S Front chassis bracket
1 line
From RL Modulator → To O/S/R short flexi between body and chassis
1 line
From RR Modulator → To N/S/R short flexi between body and chassis
1 line
From N/S/R short flexi between body and chassis → To O/S Rear chassis bracket
1 line
From O/S/R short flexi between body and chassis → To N/S Rear chassis bracket
Product page
Complete Braided Brake Line kit for Land Rover Discovery 2 V8 1998-2004 LHD
All kit instructions are listed on the fitting instructions page.
Stuck on something?
If anything does not match what is in front of you, stop and ask before fitting.
Email pioneer4x4@outlook.com · Tel 01404 643149